Binga offers Plunger PumpFluid End Consumables in fracturing and
cementing serivces such as,
Plunger: hard surface-coated or flame-sprayed, long servicelife. Plungers
are used to pull fluid into the fluid end through the suctionvalve
and push it out through the discharge valve. They do it by
retractingfrom the fluid end to create volume in the fluid end
chamber and then extendingback into the fluid end chamber to
displace volume and push the fluid out.
Valve & Seat: forged alloy construction, deep carburized surface,greater fluid
flow and easy valve maintenance. Valves are used to direct theflow
through the fluid end and separate the suction side of the pump
from thedischarge side. As the plunger is pulled back the pressure
in the fluid enddrops causing the discharge valve to pull harder
onto the discharge valve seatand also causes the suction valve to
lift off its seat.
Pressure Packing: The pressure packing creates a seal around the movingplunger to
contain the fluid being pumped. The packing arrangement consists
ofseveral components that work together in order to achieve this.
HT400:Spacer Ring, Header Ring, Packing Ring, FemaleAdapter, Seal
Carrier, Seal Carrier O-ring, Packing Lube Seal
Tws600: Lantern Ring, Seal Ring, Pressure Ring, PKGadapter, Header
Ring, O-ring, Back-up, O-ring, Back-up, Wiper Ring
Plunger Pump Model includes,
Gardner Denver: GD2500